Heavy Duty Metal Cladding Paints For Farm Sheds & Barns

Metal Cladding Paints for Farm Sheds & Barns
Metal or structural steel agricultural buildings and barns.
Application:
Stir well. Easy to apply by brush or roller. If more than one can of a colour is to be used in the same
area, intermix before use
Size:
5 Litres, 20 Litres & 205 Litres
Drying Time:
Touch dry 3-6 hours at 15°C
Over coating minimum 12-24 hours
Technical Data:
Volume solids 48.9% D.F.T 25 microns (1 coat)
High VOC Content 25-50% VOCs (Volatile Organic Compounds) contribute to atmospheric pollution. EU limit value for this product (Cat A/d): 400 g/l (2007)/300 g/l (2010).
This product contains max 300 g/l VOC.
Coverage:
Theoretical spread rate 13/17 sq metres/litres (depending on the porosity and age of the surface being coated)
Standard Colour Range:
Black, Dove Grey, Dutch Blue, Emerald Green, Red Oxide, Slate Grey
An extensive choice of colours available from the RAL/B.S range.
General Info:
Metal cladding paints for farm sheds & barns is a heavy duty, solvent-borne protective finish coating formulated for interior and exterior use.
With excellent covering properties, the key advantages of this product are that it delivers an attractive semi-gloss finish that combines excellent opacity with outstanding durability making it highly resistant to inclement weather.
It is ideally suited for the long term protection of metal or structural steel agricultural buildings and barns.
Preparation:
All surfaces to be painted should be clean, dry and free from loose and flaking material
When painting iron and steel, remove all mill scale and rust
Prime bare surfaces with the appropriate primer
Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly
Wear a suitable face mask when dry sanding
Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.
Cleaning:
Remove as much product as possible from the equipment used to apply the coating before cleaning
Replace lid firmly
Clean equipment immediately after use with white spirit or paint cleaner
Some local authorities have special facilities for the disposal of waste coatings
Do not empty product into drains or watercourses.