Heavy Duty Anti-Corrosive Machine Enamel Skip And Container Paint

Skip and container paint is a highly durable, solvent-based paint made from a heavy-duty, synthetic alkyd resin ensuring a long-lasting, durable coating.
Designed for use on skips, waste bins, shipping containers and other steel surfaces needing a durable coating with good weather and impact resistance.
A durable machine enamel with anti-corrosive properties to prevent rust formation while also providing high impact resistance to reduce visible damage when the surface is impacted, knocked, hit or scraped. Making this a perfect product for use on waste bins, skips and shipping containers.
This product is designed to be tough and durable paint which will provide an easily cleanable coating while protecting the surface from rust and weather damage.
Can be easily applied by brush, roller or airless sprayer to metal cladding and other surfaces including wood, concrete and brickwork.
SURFACE PREPARATION
Ensure all surfaces are sound and clean, free from dust and flaking paint.
Ensure the surface is completely dry and free from condensation and damp.
Remove any loose or flaking pay
Areas with exposed rust should be primed with a coat of - Anti-Corrosive Oxide Primer for maximum adhesion and corrosion resistance.
SUITABLE SUBSTRATES
Steel, metals, concrete, brickwork, wood and other porous substrates.
SPREADING RATE (Coverage)
Approximately 6 - 8 square metres per litre, per coat
This varies, apply in thin even coats to ensure maximum durability and lower drying times.
DRYING TIME
Touch Dry: 6-8 hours at 18°C
Overcoat able: 6-8 hours at 18°C
APPLICATION
Brush, Roller, or Airless and compressor sprayer.
Mix thoroughly before use with a paddle mixer drill attachment.
Two coats should be applied thinly and evenly to provide maximum protection and to achieve lower drying times.
Make sure the surface is 100% dry and free from any moisture or contaminants before application.
STORAGE PRECAUTIONS
Store away from heat and flames. For long-term storage, keep away from frost. Secure lid between uses to prevent paint hardening.
COMPATIBLE PRIMER
The primer to be used with this product is - Anti-Corrosive - Metal Oxide Primer Paint.
CLEANER / THINNERS
This product can be thinned with standard White spirits, thinning should only be done if the product is being sprayed and the sprayer is unable to spray the product un-thinned. Up to 15% white spirits can be added, try and add as little white spirits as possible until spraying is possible to ensure maximum quality.
Cleaning brushes and equipment should be done with White spirits.
BATCH INFORMATION
We recommend ordering all the paint required in one order so you receive the same batch, ordering on different dates will result in receiving different batches which may result in a shade difference.
This is fine if you are planning on using the different batches on different coats, However, it's not recommended to use on the same coat.